Installing The Multipurpose Blade - KitchenAid 5KFP0933 Instructions Manual

ASSEMBLING THE FOOD PROCESSOR

Installing the multipurpose blade

IMPORTANT: The multipurpose blade can only be used with the work bowl.
Place the blade on the power shaft.
1
Rotate the blade so it falls into place
on the power shaft.
Install the work bowl cover, being sure
3
it locks into place.
10
W10693732C_EN_v03.indd 10
Push to lock: Press down firmly on the
2
multipurpose blade until it is down as
far as it will go. The multipurpose blade
features an internal seal that fits tightly
over the center of the work bowl.
OP
3/2/15 9:11 AM