Table of Contents
Advertisement
English
8. Mounting the Power Supply bracket
a.
Mount the Power Supply bracket as illustrated with the provided screws (2 Pan M4x10 CrossHead
/ Torx).
b. Place the Power Supply Adapter into the bracket as shown.
9. Switching On:
a.
Plug in the mains cord and switch on the Monitor.
b. A cold start (power on) of Easy Advertiser SmartCard may take some time, please wait.
c.
Once the Easy Advertiser SmartCard is booted up and the Monitor switched on, you can begin
configuring the Monitor and Easy Advertiser SmartCard settings.
Page 4
Easy Advertiser (CRD01/00)
Revision 34 | 22 December 2008
Advertisement
Table of Contents
