Adjusting The Bicycle - Qwic PERFORMANCE Series Manual

ADJUSTING THE BICYCLE

Seatpost suspension
It is possible to fine adjust the spring load of bikes with
seatpost suspension. First loosen the seat clamp and take
the seatpost out of the frame. You can find a silver bus on
the bottom side of the seatpost that can be rotated inward
or outward in the black outer tube. Use an Allen key and
rotate clockwise to tighten the suspension and rotate
counterclockwise to loosen the suspension.
Attention! Please make sure that the silver
!
bus never protrudes from the black outer
tube. If the silver bus is loosened too far, it
can break loose under the pressure from
the spring.
58
Adjustable stem
De stem on our Performance bikes are adjustable in height.
Loosen the two indicated Allen bolts on the side of the
stem. The stem has 90 degree adjustability. If the stem is in
the desired position, fasten the two Allen bolts again with
the indicated torque of 14-15 Nm.
The handlebar can be rotated to the desired position as
well. Use the general instructions indicated on page 61.
ADJUSTING THE BICYCLE