Display & Controls - Qwic PERFORMANCE Series Manual

DISPLAY & CONTROLS: ALL MODELS
The display will only work if the battery is in the bike.
Switch on the display by pressing the 'ON/OFF' Button.
ON / OFF
Short press (<0,5 secs)
power button
ON
Buttons:
Assist Up Button
Power Button
Walk Assist
Assist Down Button
40
OFF
Speed
Mode
Short press (<0,5 secs)
Walk Button to Switch
Range
Mode
Information on the screen
Speed
(km/h ormph)
Range
Indicated km left to drive
Assistance level
0 t/m 4
Mode 0 = No assistance
Lighting Indicator
Status indicator of lighting
Failure
See next page for failure codes
Battery Indicator
5 Bars = Full Battery (Voltage based)
Bluetooth connection
Connected trough Bluetooth
DISPLAY & CONTROLS