Page 1
Festool GmbH Wertstraße 20 D-73240 Wendlingen Tel.: +49 (0)7024/804-0 Telefax: +49 (0)7024/804-20608 www.festool.com Original operating manual - Bench-mounted circular saw and circular trimming saw P R E C I S I O CS 50 EB CS 50 EB Floor...
With the special saw blades for aluminium offered by Festool, these machines can also be used for sawing aluminium. The specified illustrations can be found at the Materials containing asbestos must not be pro- beginning of the operating instructions.
CS 50 EB d. Never leave the power tool unattended. Only ing it to the power supply and/or the battery, leave the power tool when the insertion tool has and before picking it up or carrying it. If you come to a complete halt. have your finger on the switch when carrying the power tool or if the tool is connected to the 2 ELECTRICAL SAFETY...
Page 14
CS 50 EB ing correctly and do not jam, and whether any outside the permitted temperature range can parts are broken or damaged so badly that destroy the battery and increase the risk of fire. the power tool will not function correctly as a 6 SERVICE result.
Page 15
CS 50 EB - You must re-install the safety equipment im- mediately after work that requires the guard - Wear suitable personal protective equipment: to be removed, see sec. 5.2. - Do not use circular saws for cutting slots ear protection to reduce the risk of hearing (grooves in workpiece).
Page 16
CS 50 EB To fold out the legs, open the four rotary knobs extraction connections so that a Festool extractor [1-6] as far as they will go. After folding out the module can be connected. legs, retighten the four rotary knobs.
Page 17
Due to the special shank, only the saw Brake blades offered by Festool for this machine After switching-off the tool, the saw blade is elec- may be used. tronically brought to a standstill in 1.5 – 2 seconds - Open the locking mechanism [1-3] and remove (only for 230 V - 240 V configuration).
Page 18
Please find the nearest address up to the maximum cutting depth – this cuts the at: www.festool.com/Service splinterguard to shape. Use only original Festool spare parts! EKAT For a optimum function the raised part [10-1] of Order No. at: www.festool.com/Service the splinterguard should protrude slightly (approx.
Page 19
- On completion of your work, wind the power The accessory and tool order number can be found cable around the holders [2-1]. in the Festool catalogue or on the Internet under - A damper means that the saw unit runs back ”www.festool.com”.
Need help?
Do you have a question about the PRECISIO CS 50 EB and is the answer not in the manual?
Questions and answers