Levelpro-Sensors Manual
Heavy Duty Industrial Level Transmitter
Permissible media are liquids (no solids or frozen media), specified in the data sheet. In addition it
has to be ensured, that this medium is compatible with the any wetted parts of the level sensor.
The technical data listed in the current data sheet are engaging and must be complied with. If the
data sheet is not available, please order or download it from our homepage.
(http://www.iconprocon.com)
WARNING! – Danger through improper usage!
1.5 Package Contents
Please verify that all listed parts are undamaged included in the delivery and check for consistency
specified in your order:
Probe
Mounting instructions
2. PRODUCT IDENTIFICATION
The device can be identified by its
manufacturing label.
Fig. 1 Manufacturing Label
3. MECHANICAL INSTALLATION
3.1 Mounting and safety instructions
WARNING! Install the device only when depressurized and not connected to power source!
WARNING! This device may only be installed by qualified technical personnel who has read
and under stood the operating manual!
Handle this high sensitive electronic precision measuring device with care, both in packed and
unpacked condition!
There are no modifications/changes to be made on the device.
Nominal
Pressure Range
SN: 0143693
Series :
Range :
Max Pressure:
O Ring Seal:
Ordering
code
Serial Number
300S-1010 -11
Connector Pinout:
300S
Supply :
0-
Output Signal :
| PSI | KPa
Acc
Accuracy
Level Transmitter
1/ RED : +
2/ Blu : -
3/ Yellow : Signal Output
Wiring
3