2
Remove the two screws on the top of the
unit.
3
Remove the mounting sleeve with the
supplied disassembly tools.
14
EN
CEM220-55-IFU-ENG_1.0.indd
CEM220-55-IFU-ENG_1.0.indd
14
14
4
Ensure that car dashboard opening is
within these measurements:.
5
Install the sleeve into the dashboard and
bend the tabs outward to fi x the sleeve.
Note
•
Skip this step if the unit is not fi xed by sleeve but
supplied screws.
2008-10-28
2008-10-28
10:31:48
10:31:48