Select Shock-Protect Setting; Reset - Philips CEM210/55 User Manual

Note
If any special characters are present in the
MP3 track name or album name, it may not
display correctly on the screen because these
characters are not supported.
Some WMA is protected by Digital Rights
Management (DRM), it cannot be played on
the unit.
unit are not displayed or played.
1
Press MENU/DISP for 3 seconds.
2
Press or repeatedly to until [ROLL
ON] or [ROLL OFF] is displayed.
3
Turn to select a setting:
[ROLL ON] (scroll on): Auto scroll
during play.
[ROLL OFF] (scroll off): No auto
scroll display.

Select shock-protect setting

You can select the shock protection setting,
depending on the stability of your car and the
condition of the road.
1
Press MENU/DISP for 3 seconds.
2
Press or repeatedly until [ESP] is
displayed.
3
Turn to select a setting:
[ESP 10 S]: select this when the road
is smooth and there are few bumps.
[ESP 40 S]: select this when the road
is bumpy and unstable.

Reset

You can reset the unit to its default setting.
1
Detach the front panel (see 'Detach the
front panel' on page 25).
2
Press the reset button by using a ball-
point pen or a similar tool.
24 EN
»
Preset adjustments such as preset
channels and sound adjustments are
erased.