Advertisement
How to use the dishwasher
1. After loading the crockery, close the
dishwasher door properly and open the
water supply tap.
2. Select the desired programme by
turning the selector's knob clockwise:
position 1: "Pre-rinse"; position 2:
"Normal"; position 3: "Daily". To select
the "Eco" programme: turn the
selector's knob to position 2 and press
the 50° C button.
The dishwasher starts automatically as
soon as the On/Off button has been
pressed.
3. Press the On/Off button to switch the
dishwasher on. The indicator lamp
switches on.
To change the selected
programme, press the On/Off
button to turn the dishwasher off
and then turn the selector knob to
the desired programme (if
required, select the optional Eco or
Rapid functions by pressing the
relevant buttons). Press the On/off
button to start the newly selected
programme.
Note: if you switch off the dishwasher
during a wash cycle, when switched on
again, the dishwasher resumes the cycle
from where it was interrupted.
Only open the dishwasher door if
strictly necessary during a wash
cycle and exercise maximum
caution. Danger of scalding from
steam.
4. The wash programme is over when the
selector's knob is back in the Stop
position.
5. Switch off the dishwasher now by
pressing the On/Off button. All the
indicator lamps switch off.
6. Open the door (warning: beware of hot
steam). Unload the lower rack before
the upper one.
Close the water tap.
Please read the user instructions carefully.
Upper and lower rack
Upper rack
Crockery holders:
•
Down: cups and long-stemmed
glasses.
• Up: plates.
Lower rack
Cutlery basket (A):
•
The cutlery basket can be either
inserted or removed to increase
available space, as required.
•
If present, the central compartment
is recommended for storing
teaspoons.
Plate holders (B) (if available):
Advertisement
