brennenstuhl PM 231 Operating Instructions Manual page 31

PM 231 E Operating instructions
GB
Display Metering Functions
Repeatedly press the FUNC button (6) to cycle through
the following information: VOLTAGE, AMP, WATT – kWh -
TOTAL PRICE (10, 18).
Press the FUNC button (6) to display the current draw of
the connected appliance in the value field (10) on the LCD,
AMP (11) is displayed in the unit section and the POWER
FACTOR (27, 28).
Press the FUNC button (6) again to display the wattage of
the connected appliance in the value field (10) on the LCD,
WATT (12) is displayed in the unit section and the POWER
FACTOR (27, 28).
Press the FUNC button (6) again to display the power
consumption of the connected appliance in the value field
(10) on the LCD. kWh (13) is displayed in the unit section
and the POWER FACTOR (27, 28).
Press the FUNC button (6) again to display the TOTAL
PRICE (10, 18) and the TOTAL ON TIME (21-24) in hours
and minutes of the connected appliance.
Press the FUNC button (6) again to display the VOLTac.
(15) and the Hz (26, 27).
If the total load is exceeded MAX OVERLOAD WARNING
(17) will flash on the display (2).
31
21518 BA_PM 231 DE 0454552.indd 31 05.04.18 14:41