4. Gently drive the drywall anchors into the 7/32" holes.
Locate your CAT5e/6 cable and pass it through the
hole drilled.
5. Mount the bracket to the ceiling using the provided
Phillips screws in the orientation illustrated.
LinkPro Z - Installation
6. Plug in the LinkPro Z and align the magnets on the
back of the device with two of the recessed areas
illustrated below. The magnets should fit snug in the
recessed areas, and the device should be flush
against the bracket.
6
LinkPro Z - Installation
(cont. to next page)
7