Advertisement
INSTALLATION - CEILING/WALL
MOUNT or MAGNETIC MOUNT
1. Position the Wall/ Magnetic mounting bracket in the
desired location in the orientation illustrated.
Magnetic Mounting Ring
(preferred)
NOTE: Original Mounting Ring installation process is
similar to Magnetic Mount. For more details
contact support.
2. Mark the mounting hole locations (these holes are
LinkPro Z - Installation
up
Original Mounting Ring
properly spaced for a standard 4/0 ceiling junction
box if one is available). Drill holes using a 7/32" drill.
3. Drill a 3/4" hole in the center of the space illustrated
for the CAT5e/6 cable.
4
LinkPro Z - Installation
3/4" hole for
CAT5e/6
(cont. to next page)
5
Advertisement
