Other Sound Settings; Select Video Output Format - Philips CED229/98 User Manual

2
Then, you can select one of the following
methods to preset zone settings.
‡ Press or
‡ Turn the control knob; or
‡ Press continuously.
Here are the options of zone setting:
‡ [ALL] - all speakers are in same
volume level.
‡ [LEFT] - front left speaker is louder
than the rest of the speakers.
‡ [RIGHT] - front right speaker is louder
than the rest of the speakers.
‡ [FRONT] - the front speakers are
louder than the rear speakers.

Other sound settings

You can adjust the front and rear speaker
balance, and the left and right speaker balance.
1
Press and hold
» The following options are displayed.
;
for 3 seconds.
2
Press or to select the audio settings
to be adjusted.
‡ [BALANCE]: 7L to 7R (L= left speaker
; R= right speaker)
‡ [FADE]: 7R to 7F (R= rear speaker ;
F= front speaker)
3
Press or to change the value, and
then press WR FRQÀUP
‡ You can also turn the control knob to
select a value.
4
Press to exit.

Select Video Output format

The default video output format is based on
the format that is broadcast in your country.
If the picture is distorted, change the video
output.
Simply press the button repeatedly to select
the correct video output format.
EN 17