Using The Appliance - Philips MG3710 Manual

10
English
Charging

Using the appliance

Detaching and attaching cutting elements
2
1
When the appliance has charged for 16 hour, it has
a cordless operating time of up to 60 minutes
(MG3710, MG3711, MG3712, MG3720, MG3721,
MG3730, MG3731, MG3740) or 70 minutes (MG3757,
MG3748, MG3747).
1 Make sure the appliance is switched off.
2 Insert the small plug into the appliance and put
the supply unit in the wall socket.
3 After charging, remove the supply unit from the
wall outlet and pull the small plug out of the
appliance.
Note: Switch off and clean the appliance after each
use.
1 To detach a cutting element, push upwards
against the teeth of the cutting element and
take it off the handle.
2 To attach a cutting element, insert the lug of the
cutting element into the guiding slot at the front
and push the back of the cutting element onto
the appliance ('click').