Maintenance - Whale SH2201 Installation & User's Instructions

Option 3 - Operating Whale iVan Control Panel
Space Heater
Pump Isolator
Home Button /
Setup and Options
Operating the Space Heater
1. From the home screen, touch the 'van' icon:
2. Select the desired setting by touching one of the icons. The icon will turn green to show it has been activated.
Option 4 - Operating Vehicle Manufacturer Control Panel
If your vehicle is fitted with an alternative control panel, please refer to your vehicle handbook.
8.

MAINTENANCE

If the Space Heater has not been used for some time, dust may have settled inside the Space Heater and the
ducting. Run the Space Heater on the "Fan only" setting until it clears. The outside of the appliance should not
normally require cleaning. If it does, isolate the electrical supplies and wipe down with a soft, damp cloth only.
Do not use abrasive cleaning agents. Allow to fully dry before reconnecting the electrical supplies.
The Whale® Space Heater must be checked periodically by a Whale® Approved Service Centre / Technician, or
competent person, at least annually. This must be completed according to the practice in the country where it is
used and according to the Whale® instructions. Whale recommends that annual testing of gas soundness and
combustion is carried out by an accredited LPG engineer. The appliance contains ESD sensitive components and
therefore must only be opened by a Whale® Approved Service Centre / Technician (contact Whale® Support).
Master Switch
Fig. 39 Whale iVan Control Panel (Model shown may vary)
Lights
Awning Light
22
Water Heater
Timers
Amps in Use
(Heating System only)
Battery Voltage