Installing Side Rails - WeatherTech Truck Bed Cover Installation Instructions And Owner's Manual

1: INSTALLING SIDE RAILS

NOTE: Some installs require special instructions. If required, follow special instructions
for side rail attachment along with these standard instructions.
A. Locate two side rail sections with matching profiles displayed in image below.
B. Unroll hook and loop and slide into front side rail channel.
C. Slide rear side rail with strike onto pre-installed assembly bracket on front side rail without
strike.
NOTE: S
ide rails should have little to no gap at assembly bracket.
Strike
D. Attach rear side rail with strike to assembly bracket with flanged hex bolt and square nut. Align
side rails then tighten with 1/2" wrench.
NOTE:
Do not use impact tools to tighten hardware to assembly bracket.
Flanged hex bolt
Rear side rail (with strike)
Square nut
3
Pre-installed
assembly bracket
Front side rail
(without strike)