Table of Contents
Advertisement
INSPECTION AND MAINTENANCE
The operator can perform most of inspection and maintenance. It may be necessary to review
the installation and operating instructions.
•
Periodically check and/or retighten clamps as needed.
•
Periodically check dual locking system to ensure latches fully engage side rails.
•
Periodically inspect the condition of cover assembly and all parts. Check for loose bolts and
parts, tighten if needed. Test the operation to ensure parts are functioning properly and cover
is in top operational condition.
•
If latch has been damaged, replace with new one.
NOTE: Inspection and/or maintenance should also be performed anytime a malfunction is
observed or suspected. If you need assistance inspecting and/or servicing your cover, or want to
order a replacement part, call Customer Service (number on the back page). Always use original
equipment replacement parts for your cover.
17
Advertisement
Table of Contents
