Silver Cross Surf Instructions Manual
Pushchair and bassinet
Hide thumbs
Also See for Surf:
- Instructions manual (45 pages) ,
- Quick start manual (2 pages) ,
- Instruction manual (64 pages)
Related Manuals for Silver Cross Surf
Summary of Contents for Silver Cross Surf
- Page 1 Surf Pushchair and Bassinet...
-
Page 2: Warranty
个月。 utilizzato correttamente, in conformità al manuale delle istruzioni. 保養期 所有 Silver Cross 產品均可享有36個月保養 期，提供在按照指引說明書正確使用下的工 藝缺憾保養。 الضمان مضمونة لمدة 63 شهرًا ضد عيوبSilver Cross كافة منتجات .الصناعة، بشرط استخدام المنتج على نحو صحيح وفق دليل التعليمات... - Page 3 The Surf Pushchair is designed and tested to be used with the Surf seat unit, Surf Bassinet and the Surf Essentials pack, all sold separately. Always read all the instructions provided carefully and remember, the safety of your child is your responsibility.
-
Page 4: Preparation For Use
Preparation for use Remove all packaging material from your Surf Pushchair. To use your Surf Pushchair from birth you must use the Silver Cross Bassinet (included). WARNING Check that the Bassinet or seat unit is correctly engaged before use. Surf chassis... - Page 5 Apply the brake (see point 23.1) and adjust the handle height by pushing the adjustment button in. Slide the handle up or down and release the adjustment button. The handle will lock and ‘click’ into position. Your Surf chassis is now ready for use. silvercross.com.au...
- Page 6 Place the mattress into the base of the liner. Zip your Surf hood to the zip on the Bassinet outer. Attach the hood to the frame by pressing down on the hood attachment clips on each side of frame.
- Page 7 NOTE: The bumper is to be used on the Surf Pushchair and the Surf Bassinet WARNING Please ensure the bumper bar is fully locked in place whenever lifting your child in the Bassinet.
- Page 8 Attaching the Bassinet to your chassis To attach your Surf Bassinet to the Surf chassis hold the Bassinet above the chassis. Locate the Bassinet chassis connector onto the attachment post of the chassis. Ensure the Bassinet ‘clicks‘ into place. The Bassinet should be fitted rearward facing.
- Page 9 The safety of your child is your responsibility. Using your hood on the Bassinet Zip the back of the Surf hood to the top of the Surf Bassinet frame taking care to engage the zip properly. Your Surf hood fits to the Bassinet...
- Page 10 Using your apron on the Bassinet First detached the Surf apron lower section using the zip on the front of the apron and place over the top of the Bassinet. NOTE: Please ensure you keep the apron lower section in a safe place, as you will need it when using the Surf as a pushchair.
- Page 11 Using your raincover on the Bassinet Your Surf raincover should be used when the Surf hood is attached to the Bassinet. First slide over the hood and down towards the foot of the Bassinet and over the apron. NOTE: This raincover can be used on both the Bassinet and the Seat Unit.
- Page 12 Preparing the seat unit 11.1 11.1 First, zip the hood to the back of the seat frame taking care to engage the zip properly. Attach the hood by pressing down on the hood clips on either side of the seat frame below the round black plastic locator.
- Page 13 Preparing the seat unit 12.3 (continued) 12.3 Fit the bumper bar to the seat unit by placing the metal ends of the bumper bar into the fixing points on the seat unit. Wait to hear the bumper bar ‘click’ into place. WARNING Always ensure your bumper bar is attached when your child is in the...
- Page 14 WARNING Ensure all locking devices are engaged before use. 13.1 To attach your Surf seat unit to the Surf chassis hold the seat unit above the chassis. Locate the seat unit chassis connector onto the seat attachment post of the chassis. Ensure the seat unit ‘clicks’...
-
Page 15: Using The Harness
Any additional harness must comply with BS 6684. Your child should always be harnessed in and should never be left unattended, even for short periods of time. Your Surf harness can be adjusted for the size of your child. 15.3 silvercross.com.au... - Page 16 Using the harness (continued) 15.4 15.4 The shoulder straps have 2 height positions. To adjust, first lift the flap on the back of the seat unit. Thread the harness from the back of the seat unit through to the front of the seat unit and allow the restraint clip to lay flat behind the seat securing the shoulder strap in place.
- Page 17 Attach the hood by pressing down on the hood clips on either side of the seat frame below the round black plastic locator. 16.2 Your Surf hood can be used in 4 positions. Fully open, semi-open, semi-open with viewing window, and fully covered. 16.2...
- Page 18 Using your apron on the Seat 17.1 17.1 Slide the apron flap clips on your apron to the attachment points on the inside of the seat frame and fold the apron flap over the bumper bar to enclose and secure your child.
- Page 19 Using your raincover on the Seat 18.1 18.1 Your Surf raincover should be used when the Surf hood is attached to the seat unit. First slide over the hood and down towards the toe of the seat unit. Velcro fastening secures the raincover under the foot of the seat unit.
-
Page 20: Adjusting The Seat Position
Using your bumper bar on the 19.1 Seat Unit Your Surf seat unit has a bumper bar that can be fully or partly removed. WARNING Always ensure your bumper bar is attached when your child is in the seat unit. - Page 21 Folding your Surf chassis 21.1 NOTE: To ensure your Surf chassis folds correctly remove all items from the shopping basket before attempting to fold. NOTE: If using as a travel system (with a car seat), pushchair (with seat unit) or pram (with Surf Bassinet) please ensure each part has been removed before folding.
- Page 22 Folding your Surf chassis 22.1 22.1 Rotate the handle forwards to its vertical position, listen for the click. 22.2 Still holding the handle press down gently on the central red foot pedal. Rotate the handle forwards as the chassis begins to fold.
- Page 23 Rock the pushchair backwards before moving forward. 23.2 Operating your swivel wheels NOTE: Your Surf chassis has lockable front, swivel wheels. We advise locking the front wheels if pushing the pushchair straight ahead for a long period.
- Page 24 Operating your height 25.1 adjustable handle Your Surf has a 5 position handle height. 25.1 Press and hold the handle height adjustment /folding button and slide the handle down to its lowest point. 25.2 Slide the handle up or down to required height and release the adjustment button.
-
Page 25: Safety Notes
Safety Notes Maximum weight of the Child: Up to 15kg Your Surf Pushchair is a high quality Silver Cross product. It complies with Always use the restraint system AS/NZS 2088:2013 and with correct use Check the pram body or seat and maintenance will give good service. - Page 26 Do not attach a third party CHILDREN OR BAGS ON THE buggy board. PRAM/STROLLER Accessories which are not • MAKE SURE CHILDREN ARE approved by Silver Cross shall CLEAR OF ANY MOVING PARTS not be used. IF YOU ADJUST THE PRAM/ STROLLER Only replacements parts...
- Page 27 BASSINET ONCE THE CHILD CAN adjustments. Ensure that the brake is on. SIT UP UNAIDED Never try to fold your Surf when the child is seated as this may trap the CARE SHOULD BE TAKEN IF THE child. If you have difficulty in folding or PRAM/STROLLER IS USED ON unfolding the pushchair, do not force.
-
Page 28: Care And Maintenance
Polish metal work with a clean, dry cloth. Please read these instructions carefully before using your new Silver Cross Product Fabric items and seat unit and keep for future reference. For fabric wash care instructions please refer to the care guide included with your www.silvercross.com.au... - Page 29 Notes silvercross.com.au...
- Page 30 Notes...
- Page 31 Notes silvercross.com.au...
- Page 32 Premium Brands Pty Ltd, 10 Capital Court, Braeside Victoria 3195, Australia silvercross.com.au...
Need help?
Do you have a question about the Surf and is the answer not in the manual?
Questions and answers