Advertisement
Poor or distorted sound from the surround speaker
Test different sources (if available).
Place the surround speakers according to the placement guidelines
Make sure that the positive and negative speaker cable wires are
securely inserted into the adapters. Firmly insert the adapters into
the speakers.
If placing the speakers in a cabinet or on a shelf, position them
as close as possible to the front edge of the shelf for optimum
acoustic performance.
Run ADAPTiQ audio calibration
.
NOTE:
If you no longer have the ADAPTiQ headset (provided with your
soundbar), contact Bose customer service for a replacement.
No surround sound
Make sure that your TV can output surround sound audio (refer to
your TV owner's guide).Make sure that one wireless receiver is set to
the (left) channel and the other is set to the (right) channel . Make sure
that the positive and negative speaker cable wires are securely
inserted into the adapters. Firmly insert the adapters into
the speakers.
UNABLE TO COMPLETE ADAPTIQ AUDIO
CALIBRATION WITH YOUR SOUNDTOUCH
300 SOUNDBAR
If you can't complete ADAPTiQ audio calibration with your
SoundTouch 300 soundbar,
listen to the voice prompts for the following error messages:
Advertisement
