Assembly Instructions - Broil King 06695008 Operator's Manual

Assembly Instructions

Remove all contents from the packaging. Make sure
all parts are present before attempting assembly. Once the
grill is fully assembled, go back and check to make certain
all the bolts are secure. Tighten again using the screwdriver
provided if necessary.
Estimated Assembly Time: 45 minutes.
Step 1 (Swivel caster assembly)
Note: Before beginning assembly, make certain the two swivel
casters on the back panel are locked.
a) Align the two holes on swivel caster (I) with the two holes on
front frame (W).
b) Insert one bolt (AA), one lock washer (CC), one flat washer
(BB), one nut (JJ) and one bolt (KK) into each pre-drilled
holes by hand.
c)
Go back and tighten all the bolts using the screwdriver
provided.
Step 3 (Heat insulation panel assembly)
a) Align the two holes on cart left side panel (F) with the two
holes on heat insulation panel (E).
b) Insert one bolt (AA) with one lock washer (CC) and one flat
washer (BB) into each pre-drilled holes. Tighten bolts by
hand until secure.
c) Repeat the procedure for the heat insulation panel and cart
right side panel assembly.
d) Tighten all bolts using the screwdriver provided.
GSF2818KSN
Instruction Manual
Guide d'utilisation
8
Step 2 (Cart assembly)
a) Push the cart front frame (W) and
cart right side panel (V) together
and connect well, then push the cart
back panel (U) and cart right side
panel (V) and connect well. Make
certain the connections are secure.
Align the two holes on the cart front
b)
frame (W) with the two holes on cart
right side panel (V). Insert one bolt
(AA) with one lock washer (CC) and
one flat washer (BB) into each
pre-drilled holes. Tighten bolts by
hand until secure.
Repeat the procedure for the cart
c)
right side panel and cart back panel
assembly.
d) Repeat the procedure for the left
side cart panel (F) assembly.
Go back and tighten all bolts using
e)
the screwdriver provided.