Installing The Dishwasher; Step 1: Prepare All Parts And Tools - EdgeStar BIDW1802SS Installation Manual

Installing the Dishwasher

If this is a new installation, most of the installation work must be done before the dishwasher is moved
into place. If this is a replacement, you must check existing dishwasher connections for compatibility
with the new dishwasher. Replace the existing connections as necessary.

Step 1: Prepare All Parts and Tools

Before starting the installation, prepare all the necessary parts and tools required to install the
dishwasher. This will save installation time and simplify the installation process.
Parts Required
The following parts are provided with the dishwasher. Contact customer service if any of these parts
are missing:
The following parts are not provided and necessary to complete a new installation. Parts for
replacement installations may vary depending on your existing configuration:
The 90° elbow must have a 5/8" NPT end to attach to the unit. The other end needs to match the water line.
4