Advertisement
GARMIN NAVI SYSTEM SHOW in our unit
Original
Original
Original
Original button
button
button
button controlling:
controlling:
controlling:
controlling:
If you want to use the car original button to operate vido interface switching function, you should wield
the white cable (on the power connector) to the original monitor PCB, the point on the original monitor
PCB is the switching point:
The white cable in power connector
------Switching cable
1. Black: Ground
2. Green: to rear Light power cable:=12V
3. White: Switching cable to original Switching Point weld
4. RED: +12V power.
IGO System Show
Press MEDIA: RGB—AV1—AV2
-----Original Radio—RGB -----
If you do not weld the white switching cable
for original button switch, please use this
toggle switcher press: RGB—AV1—AV2
---original----RGB----
Advertisement
