Log In To Access Extender Settings - NETGEAR Nighthawk X4S Manual

Log In to Access Extender Settings

After installation, you can log in to the extender to view or change the
extender's settings.
¾ To log in to the extender:
1. Launch a web browser from a computer or mobile device that is
connected to your extender network.
2. Log in to your extender:
• If you did not enable the One WiFi Name feature, enter
www.mywifiext.net in the address field of the browser.
• If you enabled the One WiFi Name feature, enter one of the
following URLs:
‑ Windows-based computer. http://mywifiext
‑ Mac computers and iOS devices. http://mywifiext.local
‑ Android devices. http://<extender's IP address> (for
example, http://192.168.1.3)
To find your extender's IP address, do the following:
a.
b.
Log in to your router.
Find the page in your router web interface that lists the
devices connected to your router.
4