Connect To The Extender Network; Wifi Connection - NETGEAR Nighthawk X4S Manual

Connect to the Extender Network

After you complete the setup process for your Nighthawk® extender, you
can connect all your devices to the new extender network using a WiFi or
WPS connection.

WiFi Connection

¾ To connect to the extender WiFi network:
1. On your WiFi‑enabled computer or mobile device, open the WiFi
connection manager that manages your WiFi connections.
The WiFi connection manager scans for WiFi networks in your area.
2. Find and select your extender's WiFi network name (SSID) and enter
your extender's WiFi password.
This is the SSID and password that you set up during the installation
process.
2