LINK-MI LM-DA401 User Manual

Spdif/toslink digital optical audio switch 4x1

Table of Contents

Download this manual

U S E R

M A N U A L

LM-DA401

SPDIF/TOSLINK

Digital Optical Audio Switch 4x1

Table of Contents

Need help?

Do you have a question about the LM-DA401 and is the answer not in the manual?

Page 1 U S E R M A N U A L LM-DA401 SPDIF/TOSLINK Digital Optical Audio Switch 4x1...
Page 2 INTRODUCTION Dear customer Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference. Our series of HDMI converters, switchers, extenders, matrixes and splitters are designed to make your A/V device use more convenient, more comfortable, more productive and more cost-efficient.
Page 3 Physical Connection Showing Picture ： Figure 1.0 Front Panel Showing Picture 1. POWER : power switch 2. IR : Remote control 3. 1,2,3,4 : input signal LED 4. SWITCH : input switch Figure 1.1 Rear Panel Showing Picture 5. DC5V : 5V Power Adapter Interface 6.
Page 4: Specifications
SPECIFICATIONS: Support audio format LPCM2.0/DTS/Dolby-AC3 Peak wavelength 650nm Max baud rate 16Mbps Output cable distance ≤40m(Use the optical fiber cable loss less the 0.2Db/m ) Max working current 100mA Power adapter format Input:AC (50HZ, 60HZ) 100V-240V; Output: DC5V Operating Temperature range (0 to +40℃) Operating Humidity range 5 to 90%RH (No Condensation)
Page 5 5. Pls turn the power off when the machine is not used for long time. 6. Pls do not open the cover and do not touch the inside parts. 7. Pls use the original factory power adapter. Before power on, pls check the connection line carefully. And make sure that all interfaces are normally connected.