Table of Contents
Advertisement
Quick Links
LINK-MI HDMI 4x1 Quad Multi-Viewer
With Seamless Switcher
Operation Manual
1. Introduction
This product is a high performance 4 by 1 Quad Multi-Viewer with seamless
switcher. It supports four High definition input source display on one screen, and
have three multi-view effect mode. As a switcher, it can also seamlessly switch
the four HD input freely. The product can be controlled by various ways, through
the front panel button control, IR control, RS232 control etc.
The product
provides an S/PDIF link to output the HDMI source audio at the same time.
In
addition,this product have basic version and extender version.The Extender
version can extend the video and audio signals over single 50m CAT5e/6 with
Bi-directional IR control.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for LINK-MI LM-S41
Summary of Contents for LINK-MI LM-S41
- Page 1 LINK-MI HDMI 4x1 Quad Multi-Viewer With Seamless Switcher Operation Manual 1. Introduction This product is a high performance 4 by 1 Quad Multi-Viewer with seamless switcher. It supports four High definition input source display on one screen, and have three multi-view effect mode. As a switcher, it can also seamlessly switch the four HD input freely.
-
Page 2: Package Contents
2. Features Compliant with HDMI 1.3a,HDCP 1.2； Supports multiplexed HDMI 4-input and 1-output； Supports up to 1080p High Definition resolution； Support 4by1 Quad Multi-viewer and seamless switch； Support scaler up, scaler down function； Support multi output resolution； ... -
Page 3: Front Panel
PCM2, 5.1, 7.1CH, Dolby 5.1, DTS5.1 480i60Hz,480p60Hz,576i50Hz,576p50Hz,720p50/60Hz, Audio output 1080i50/60Hz,1080p24/30/50/60Hz,800x600@60, Input Resolution 1024x768@60,1280x720@60,1920x1080@60; 1080p,1080i,720p,1024x768,1360x768 Human Body model: ±8 KV (air-gap discharge) Output Resolution ±4 KV (contact discharge) ESD Protection 12 V/2.5A DC (US/EU standards, CE/FCC/UL certified) 118mm(W) X 250mm (D) X 32mm(H) Power Supply 750 g Dimensions... - Page 4 1. Input: These slot is where you connect the HDMI source output from DVD, PS3,Set-top Box and Note Book. 2. OUTPUT: The HDMI is where you connect the HDTV or monitor with HDMI cable for input source display.The Coax is where you connect to the amplifier with coaxial cable.
-
Page 5: Connect And Operate
DC 5V: Connect from 5V DC power supply into the unit and connect the adapter to an AC outlet. IR RX: Connect to the IR Receiver for IR signal reception. Ensure that remote being used is within the direct line-of-sight of the IR receiver. IR TX: Connect the IR Blaster cable included in the package for IR signal transmission. -
Page 6: Detail Description Of Display Mode
projector. The input source can be controlled from the display. This is accomplished by using an optional IR Receiver pigtail pointing away from the display(s), which can be connected with an optional HDMI IR Adapter , and inserted between HDMI cable connector and display with the toggle switcher at the “IR”... -
Page 7: Remote Control
MODE1: The quad multi-viewer divides the four HD input to the same size and display on one screen. And now switch the input button on front panel or IR remote,the HDMI output audio will Corresponding to the selected input source. MODE2: The quad multi-viewer divides the four HD input to one bigger and three smaller picture display on one screen.And now switch the input button on front panel or IR remote ,the bigger picture will Corresponding to the selected... -
Page 8: Installation
The PC controller is green software. Just use a cable to connect the PC via Installation RS232 port and copy “Quad multi-viewer.exe” to PC to complete installation. 1. Connect PC and multi-viewer by RS232 cable (headers of both sides of cable Preparation should be FEMALE) 2. - Page 9 8. Connection Diagram Basic version: Extender version:...
Need help?
Do you have a question about the LM-S41 and is the answer not in the manual?
Questions and answers