Related Manuals for LINK-MI LM-MH31
Summary of Contents for LINK-MI LM-MH31
-
Page 1: User Manual
USER MANUAL LM-MH31 4K HDMI Switcher 3X1 with Audio Amplifier Support PIP and MHL function... - Page 2 Introduction 4K HDMI Switcher 3X1 This HDMI switcher 3x1 allows 3 HDMI sources to be switched to a single display terminal by remote control or buttons on switch.Support picture-in-picture (PIP ) video preview, which makes it simple and intuitive to switch.The HDMI 1 input support HDMI/MHL dual-mode,available for the equipments with MHL interface.
-
Page 3: Specifications
Features: Support HDMI1.4b Support 3D video format Support the resolution up to 3840X2160/30HZ Support 3.2Gbps data rate for TMDS clock up to 320MHz Support 8/10/12 bit deep color Support 2.1 audio signal power amplifier,up to 30W Support heavy bass ... - Page 4 Product Picture: Physical interface diagram:...
-
Page 5: Special Features
○ 1 : SPEAKER: Amplifier output ○ 2 : SUB OUT: heavy bass output ○ 3 :R/L OUT： R/L audio output ○ 4 : COAXIAL: coaxial audio output ○ 5 : OPTICAL OUT: optical audio output ○ 6 : OUTPUT： HDMI signal output ○... - Page 6 Button operation instructions： +/PIP Key: 1)short pressing,to adjust the audio power amplifier——Volume+. 2)long pressing about 5 seconds,appear PIP mode,via “select” button to choose the HDMI inputs,and then press “+/PIP” for sure. -/5.1H Key: Adjust audio power amplifier,——volume-;When press this button about 5 seconds, can switch the audio channel between 5.1 and 2.1.
- Page 7 Notes 1. When the Resolution is over 1080P,the switcher does not support PIP function 2. What this manual said “4K mode “ refers to a resolution higher than 1080P @ 60Hz 3.In the non-4k mode, when a new signal source put in, it will appear a new source of input preview on the left of the screen 4.In PIP function, the 2 small screens are with fixed size on the left of the main screen 5.In PIP function, the position of each small picture is corresponding fixed with their input source（pic...
Need help?
Do you have a question about the LM-MH31 and is the answer not in the manual?
Questions and answers