Page 2
CS214-01000 Product Information Overview The Conquip Concrete Forklift Skip is a skip designed to be attached to a forklift for quick and easy manoeuvring and pouring of concrete. The geared opening aids easy flow and control of concrete pouring. Key Benefits •...
Page 3
11. When in position, lower the skip until the load is suspended above the NOTE: These parts are for this model, they may differ for previous versions. Please contact Conquip with any queries. discharge point.
Page 4
Your risk assessment will determine the correct Personal Protective Equipment (PPE) 14. When discharge is complete, close the gate fully and move the skip back to for the task you are doing. You must use it. Conquip recommends that you should wear: the ground.
Page 5
If any third-party modifications or alterations, involving drilling, welding, cutting or distortion of materials in any form, are to be carried out on the product, Conquip Engineering Group must provide full written approval •...
Page 6
In accordance with EN ISO 17050-1:2004 Declaration: As defined by the Machinery Directive 2006/42/EC and subsequent amendments We, CONQUIP ENGINEERING GROUP, herewith declare that the following indicated equipment meets the fundamental health and safety requirements concerning the EU guide line(s), due to their design and manufacture.
Page 7
Important Notes • This User Guide is for this Conquip product only. • Any movements of the product must be thoroughly planned before the work commences to identify potential hazards and assess risk. • All personnel involved in lifting and transportation of this product must have read this User Guide and must be properly briefed.
Need help?
Do you have a question about the Concrete Forklift Skip 500 and is the answer not in the manual?
Questions and answers