Product Information Overview The Conquip Concrete Coneflow Skip is a general purpose skip for fast and accurate placing of concrete. It is designed to lay down when being filled, and can be either geared or levered opening for easy flow.
The skip can now be raised and moved to where it is required. NOTE: These parts are for this model, they may differ for previous versions. Please contact Conquip with any queries. 7. To aid manoeuvring, attach control tag to the skip.
Your risk assessment will determine the correct Personal Protective Equipment (PPE) open the gate sufficiently to allow the load to empty. for the task you are doing. You must use it. Conquip recommends that you should wear: •...
Page 5
If any third-party modifications or alterations, involving drilling, welding, cutting or distortion of materials in any form, are to be carried out on the product, Conquip Engineering Group must provide full written approval •...
In accordance with EN ISO 17050-1:2004 Declaration: As defined by the Machinery Directive 2006/42/EC and subsequent amendments We, CONQUIP ENGINEERING GROUP, herewith declare that the following indicated equipment meets the fundamental health and safety requirements concerning the EU guide line(s), due to their design and manufacture.
Important Notes • This User Guide is for this Conquip product only. • Any movements of the product must be thoroughly planned before the work commences to identify potential hazards and assess risk. • All personnel involved in lifting and transportation of this product must have read this User Guide and must be properly briefed.
Need help?
Do you have a question about the Concrete Coneflow Skip Series and is the answer not in the manual?
Questions and answers