Pizza - Sage Smart Oven Air Fryer SOV860 Quick Manual

6. Once the oven has finished preheating, an
alert will sound and food can be inserted into
the oven.
7. Place food, positioned on the included roasting
pan or other oven-proof dish, on the center of
the wire rack so air will flow around all sides of
the food. Close the oven door.
8. After the PREHEATING alert has sounded, the
timer will automatically begin to count down.
The cycle can be stopped at any time by
pressing the START/CANCEL button.
START/CANCEL
9. At the end of the ROAST cycle, the oven
alert will sound. The START/CANCEL button
backlight will go out and the LCD screen will
illuminate blue.
PIZZA FUNCTION
The PIZZA function melts and browns cheese and
toppings, while crisping up the pizza crust.
1. Insert the wire rack, with the spokes facing
upward, into the middle rack height position.
2. Close the oven door.
3. Turn the FUNCTION dial until the indicator on
the LCD screen reaches the PIZZA function.
The top figure on the LCD screen indicates
the preset PIZZA temperature of 210°C, while
the bottom figure indicates the preset time of
':20 MINS'. The preset CONVECTION and
FROZEN settings will also be displayed.
4. The pizza temperature, time, convection,
and frozen settings can be adjusted before
or during the cycle.
a) The pizza temperature is displayed as
the top figure on the LCD screen. Turn the
TEMPERATURE dial to adjust the temperature
from 50°C to a maximum of 230°C.
b) The cooking time is displayed as the bottom
figure on the LCD screen. Turn the TIME dial to
adjust the time up to 2 hours.
5. Press the START/CANCEL button to activate
the PIZZA function. The button backlight will
illuminate red, the oven alert will sound and the
LCD screen will illuminate orange. The LCD
screen will indicate a blinking 'PREHEATING'.
6. Once the oven has reached the set
temperature, the temperature alert will sound.
7. Place food, positioned on the included pizza
pan if using, on the center of the wire rack so air
will flow around all sides of the food. Close the
oven door.
8. After the PREHEATING alert has sounded,
the timer will automatically begin to count
down. The cycle can be stopped at any time by
pressing the START/CANCEL button.
START/CANCEL
EN
START/CANCEL
15