Bertazzoni REF60BIS Instruction Manual page 12

7)Exchange the F:bottom hinge and F:upper hinge
and install the top hole cover and lower hole caps.
8) Remove the two fixed blocks of freezer door and rotate them
and install them on other side of
:
F bottom hinge
Step 3:
install left upper hinge
9). The picture after completion is shown as below
（The picture above is only for reference. The actual configuration will depend on
the physical product or statement by the distributor）
freezer door .
Step2:
F:upper hinge
put refrigerator
door on left bottom
hinge vertically
Step 1:
install left bottom hinge
,then install them according to below steps,
for 180°，
10
hole cover
fixed block
180°
hole caps