When Connected to an Indoor Unit and an ventilator(ERV) Together
Outdoor Unit
COM1 (F1, F2)
COM2 (F3, F4)
NOTE
• Regardless of the indoor unit group address (RMC address), only the indoor units connected to COM2 are controlled by
2-remote controller.
• For the slave Wired Remote Controller settings, please refer to the sections about the additional functions of the Wired
Remote Controller. (Refer to page19) 0 : Master, 1 : Slave
Indoor Unit
COM2 (F3, F4)
Wired Remote
Controller (Master)
Ventilator
(ERV)
Wired Remote
Controller (Slave)
English 13
13