Technical Characteristics; Maintenance - babymoov A047010 Instructions For Use Manual

Aquarium humidifier

Hide thumbs

Table of Contents

- Rated AC voltage: 120 V / 60 Hz

- Vaporisation flow rate: 8.3 fl oz. (250 ml)/hour at maximum output

- Power: 22 W

- Capacity of the water reservoir: 33.3 fl oz. (1.8 l)

a. Air output

b. Water capacity

c. Water level sensor

d. Transducer

Please read these instructions carefully before switching the humidifier on. Please install the humidifier on

a flat surface well out of the reach of children.

Fill the water reservoir

Do not operate the humidifier when the water tank is empty!

1. Remove the reservoir from the humidifier base (diagram 1). Turn the water reservoir upside down. Make sure that

no foreign objects are in the water tank.

2. Unscrew the filling plug (diagram 2).

3. Fill the water reservoir with tap water or distilled water (diagram 3).

4. Screw the filling plug in firmly (diagram 4).

5. Refit the reservoir on the main casing (diagram 5). Wait a few seconds for the humidifier base to fill with water.

Do not pour water into the mist outlet of the appliance.

Using the humidifier

6. Connect the supply lead to the mains (diagram 6). Turn the setting button to MAX .

Adjust the humidifier intensity to the desired setting:

- OFF = low intensity,

- MAX = high intensity.

Make sure that the vapour output is not facing walls, sockets or furniture.

Emptying the humidifier

7. Switch the humidifier off by turning to OFF and unplugging the appliance (diagram 7). The indicator light must be

off. Disconnect the appliance, remove the water reservoir from its base.

8. Empty the water from the base (diagram 8). Next, wipe off any remaining drops with a soft cloth.

If the humidifier does not work, you should check that:

- the cord is connected to the power socket,

- the vapor intensity control switch is working,

- the water reservoir has been replaced correctly on the base,

- there is sufficient water in the reservoir.

• Risk of electric shock: always unplug the Aquarium humidifier before cleaning and make sure that it has cooled down.

• You can clean the Aquarium humidifier simply using a soft and slightly damp cloth or sponge. Leave it to dry naturally.

Never immerse the base in water or any other liquid.

• Clean the water reservoir regularly (using a swab for example). Use a mixture of water and bleach (9 parts water to 1

part bleach) to clean the water reservoir. Rinse with clean water, and leave to dry naturally. Never use detergent to

clean any part of the humidifier that is designed to hold water.

• Never use stripper, solvent or any abrasive substance for cleaning: they would risk damaging your humidifier and its walls.

• Before putting your Aquarium humidifier away, empty the water reservoir and also empty out any water remaining in the

main casing. Make sure that all parts are absolutely dry. Leave the Aquarium humidifier plug unscrewed to prevent the

seal sticking to the reservoir.

Thank you for choosing the Babymoov aquarium humidifier