Advertisement
Engineering
See Product Documentation [
connecting cables for supply voltage and field devices.
Installation Location
The devices are suitable for wall installation.
Recommended height: 5 feet above the floor.
Do not install the devices in recesses, shelves, behind curtains or doors, or above or near
heat sources.
Avoid direct exposure to sun and drafts.
Seal the conduit or backwall as drafts can affect sensor readings.
Observe maximum ambient conditions.
Wiring
Use only class 2 rated power source with proper current limiting.
Installation
Thermostat may be mounted directly on wall using drywall anchors and screws (included). For
installation on a 2" x 4" conduit box , use the appropriate mounting plate and plastic trim piece
(included).
No user serviceable parts inside.
Risk of fire and injury due to short-circuits
Use properly sized wires for connections
Commissioning
Refer to the Quick guide and User guide (see Product Documentation [
device. Commissioning includes the following:
Internet connection
Application setup
Account registration and device pairing
NOTE: Before configuring your thermostat, make sure you have Internet connection, a valid
email address, and a smartphone.
Siemens
Building Technologies
WARNING
6] for information on engineering, selection and sizing
6]) to configure your
7
A6V10807603_enUS_a
2018-04-12
Advertisement
