Advertisement
conventional systems and up to two compressors and two stages of auxiliary heat in heat pump
systems.
Mechanical Design
The room thermostat consists of the following parts:
Front housing with touch screen and sensors
Back housing with terminals and relays
Mounting hardware for installation on 2''×4'' electrical box or directly on drywall
Operation and Settings
Active Display
1
System setup screens and detailed information display
2
Shows if the system is working in an energy-optimized mode. If the leaf is red, some
predefined settings have been changed. One touch to the leaf returns settings to
configured settings and reverts leaf color to green.
3
Room temperature
4
Manually select between "At home" and "Away"
5
Shows if the thermostat is operating per the schedule (
note:
6
Fan mode (AUTO/ON)
7
Temperature setpoint slider. Icon color changes as setpoint is changed:
Siemens
Building Technologies
If there is Cloud connection and the scheduler has been programmed, the thermostat
will follow it. Any temporary change of the temperature setpoint is effective only during
the currently scheduled mode.
If there is Cloud connection, but the schedule has not been programmed, the
thermostat follows the default schedule.
If there is no Cloud connection, the thermostat will have no schedule and will be
operated manually.
Slider changes to red when heating relay is energized.
Slider changes to blue when cooling relay is energized.
If system has reached setpoint and is idle, the slider color stays white.
) or manually (
). Please
A6V10807603_enUS_a
2018-04-12
3
Advertisement
