Connection Of The Terminal To The Electrical Supply Line; Supply Line; Earth Connection - ob DD2050 Use And Maintenance Manual

CONNECTION OF THE TERMINAL TO
3.1
THE ELECTRICAL SUPPLY LINE
Connection to the electrical supply line is at the customer's charge.
The customer must arrange for specialised electricians to route the
protection conductor and power lead.

3.1.1 Earth connection

Connect the terminal to the earth network using a yellow-green lead
of at least 6mm². Use the earth connection screw under the
terminal.
The equipotential connector from the scale (if any) should also be
connected to the same earth connection point (see par. 3.3.1 on
page 1-25).
If the terminal is installed on a pedestal, insert the earth lead into
this.
The leads and accessories for this connection are not part of the
supply but are at the customer's charge.
DD2050 1-19