Mercedes-Benz Telephone module with bluetooth Supplement Manual page 17

function in COMAND/the audio system;
see the separate operating instructions.
X
Select the "CONNECT PHONE" text mes-
sage and call back the sender.
or
X
If only the telephone number of the
received text message is displayed: in
COMAND/the audio system, select
Options/Display text
sender back.
The telephone module searches for SAP
telephones.
X
After the search for SAP telephones is com-
plete, select the text message function in
COMAND/the audio system.
X
In COMAND/the audio system, select and
open the text message of the mobile phone
to be authorised. The telephone number
appears in the COMAND/audio system dis-
play. This is also the 16-digit PIN.
X
Select the PIN displayed in COMAND/the
audio system, then select
and confirm.
X
When prompted to do so, enter the dis-
played PIN on the mobile phone within
20 seconds and confirm. If authorisation
has been successful, you will hear an
ascending tune.
X
Depending on the mobile phone used, you
may have to confirm a connection query
from the telephone module on the mobile
phone.
The mobile phone must be set to "auto-
matic"/"authorised: yes"; see the mobile
phone operating instructions.
X
In COMAND/the audio system, enter the
SIM card PIN and confirm if the system
prompts you to do so.
Procedure for vehicles with system
variant C
X
X
X
and call the
X
Call sender
X
X
or
X
X
X
Authorising a mobile phone
To determine the system variant:
Y
( page 8).
To authorise the mobile phone: insert
the telephone module in the bracket
( Y page 12).
Switch on COMAND/the audio system; see
the separate operating instructions.
In COMAND/the audio system, call up the
telephone menu.
Wait until indicator lamp : signals that the
telephone module is ready.
On the telephone module, press and hold
button ; for approximately 3 seconds.
If a mobile phone is already connected and
the module is logged into the network: ini-
tiate a call by entering "0001".
After button ; has been pressed, any
®
existing Bluetooth connection to a tele-
phone will be terminated. The telephone
module reports to COMAND/the audio sys-
tem again.
As soon as the Bluetooth
available again, select the call list of the
selected numbers in COMAND/the audio
system; see the separate operating instruc-
tions.
In the call list, select "CONNECT PHONE"
and call back.
15
®
connection is