Step 6. Transmitter Adjustments - RC4WD TRAIL FINDER 2 RTR Manual

3CH Transmitter / Radio
Step 4. Binding the Transmitter and Receiver Step 5. Fail Safe Function Settings

Step 6. Transmitter Adjustments

A. Throttle Trigger
Forward/
Speed Up
1. Push the trigger forward to slow down
brake.
2. Pull the trigger backward to accelerate.
WARNING: 1) Keep the transmitter and receiver
40cm apart when operating.
battery power is low.
1. Turn on the
receiver power. Press
the SW switch. The
start flashing.
2. Turn on the
transmitter.
the receiver becomes
solid, the binding
process is completed.
Brake/
Neutral
1. Set the TH, ST switches to the norm position.
2. Turn on the transmitter and receiver.
receiver should start flashing rapidly.
4. Put the throttle trigger in the break position,
become solid.
the stop position when you are adjusting the
setting.
B. Steering Wheel
Neutral
Turn the steering wheel to
the left or right to let the vehicle
turn left or right.
6
Right