Advertisement
Updating your Wifi module's firmware
If restarting your NeuLog WiFi module didn‟t solve the WiFi module‟s
performance issues, please update your WiFi module firmware as
per the guide below.
Firmware updates for the NeuLog WiFi module are regularly
released to the NeuLog website www.NeuLog.com.
Choose "Downloads" on the main menu and then choose "Upgrade
firmware".
It is recommended to check back often for the latest releases. Note:
A full WiFi firmware update walkthrough is also available on the
website listed above.
Materials Needed
A computer with wireless capability running a Windows
operating system
WiFi-201 module + USB to micro USB cable
1.
Download the latest NeuLog WiFi firmware update from the
NeuLog website.
2.
Install the NeuLog WIFI-201 firmware updater.
3.
Power your WIFI-201 module by connecting a charged BAT-200
or through connection to your computer using the included USB
to micro USB cable.
After a few moments when only the blue LED light remains on –
4.
the wireless network (NeuLog1334 for example) is being
transmitted.
5.
Open your computers wireless connection settings and connect
to the NeuLogXXXX wireless network.
NEULOG WIFI COMMUNICATION MODULE GUIDE
Note: You may get a notification that you now have a "limited"
connection – this is OK as it simply means you don‟t have
access to the internet.
Open the WiFi firmware updater, titled "wifi201 update" from
6.
your desktop (the file you downloaded and installed in step 1).
7.
A small window will open. Press Start. The updater will run
automatically and will take about five minutes.
8.
When the firmware update is complete (you will see the word
"Startus: Update finish OK" on the bottom of the window) you
can close the window, and power cycle the WiFi module by
unplugging it from your power source.
9.
Your WiFi module is now up to date!
10. You can verify it by checking the version on the "About NeuLog"
icon (after entering WiFi201.com).
If problems with your NeuLog WIFI-201 module continue to persist,
please
contact
info@neulog.com).
Included in package:
NeuLog WIFI-201 module
USB to micro USB cable.
NeuLog General Guide
Maintenance and storage:
Never submerge the NeuLog plastic body in any liquid.
After use, gently wipe away any foreign material from the WiFi
module.
Store in a box at room temperature out of direct sunlight.
NeuLog
for
additional
assistance
(at
Advertisement
