Security Settings; Network Settings - LG M6100 User Manual

Hide thumbs Also See for M6100:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1

Security settings

PIN code request
In this menu, you can set the phone to ask for the PIN code of
your SIM card when the phone is switched on. If this function is
activated, you'll be requested to enter the PIN code.
1. Select PIN code request in the security settings menu, and
then press < [OK].
2. Set On/Off.
3. If you want to change the setting, you need to enter PIN code
when you switch on the phone.
4. If you enter wrong PIN code more than 3 times, the phone
will lock out. If the PIN is blocked, you will need to key in the
PUK code.
5. You can enter your PUK code up to 10 times. If you put wrong
PUK code more than 10 times, you can not unlock your
phone. You will need to contact your service provider.
Handset lock
You can use security code to avoid unauthorized use of the
phone. Whenever you switch on the phone, the phone will
request security code if you set phone lock to When switch on.
If you set phone lock to When SIM changed, your phone will
request security code only when you change your SIM card.
Auto key lock timeout
Menu 7.4
This menu allows to set the time of Auto key lock.
Menu 7.4.1
Call barring
The Call barring service prevents your phone from making or
receiving certain category of calls. This function requires the
call barring password. You can view the following submenus.
Fixed dial number
(SIM dependent)
You can restrict your outgoing calls to selected phone
numbers. The numbers are protected by your PIN2 code.
Change codes
PIN is an abbreviation of Personal Identification Number to
prevent use by unauthorized person.
You can change the access codes: PIN code, PIN2 code,
Security code.
1. If you want to change the Security code/PIN/PIN2 code input
Menu 7.4.2
your original code, and then press < [OK].
2. Input new Security code/PIN/PIN2 code and verify them.

Network settings

You can select a network which will be registered either
automatically or manually. Usually, the network selection is set
to Automatic.
Menu 7.4.3
Menu 7.4.4
Menu 7.4.5
Menu 7.4.6
Menu 7.5
31

Advertisement

Table of Contents
loading

Table of Contents