Settings; Before First Use - AEG LF8E8411A User Manual

20 www.aeg.com

8. SETTINGS

8.1 Child Lock
With this option you can prevent that the
children play with the control panel.
• To activate/deactivate this option,
touch the Spin and the Stains/
Prewash buttons simultaneously until
the indicator
on the display.
You can activate this option:
• After you touch the Start/Pause
button: all the buttons and the
program dial are deactivated
(except On/Off button ).
• Before you touch the Start/Pause
button: the appliance cannot start.
The appliance keeps the selection of this
option after you switch it off.
8.2 Acoustic signals
This appliance is provided with different
acoustic signals, that operate when:
• You activate the appliance (special
short tune).
• You deactivate the appliance (special
short tune).
• You touch the buttons (click sound).
• You make a wrong selection (3 short
sounds).

9. BEFORE FIRST USE

During installation or before
first use you may observe
some water in the appliance.
This is a residual water left in
the appliance after a full
functional test in the factory
to ensure the appliance is
delivered to customers in
perfect working order and is
no cause for concern.
1. Make sure that all transit bolts have
been removed from the appliance.
comes on/goes off
• The program is completed
(sequence of sounds for about 2
minutes).
• The appliance has a malfunction
(sequence of short sounds for about 5
minutes).
To deactivate/activate the acoustic
signals when the program is
completed, touch the Stains/Prewash
and the Delay Start buttons
simultaneously for about 6 seconds.
If you deactivate the
acoustic signals, they
continue operate when the
appliance has a malfunction.
8.3 Permanent Extra Rinse
With this option you can permanently
have an extra rinse when you set a new
program.
• To activate/deactivate this option
touch the Temp. button and the Spin
button simultaneously until the
indicator of the Extra Rinse button
comes on/goes off and
disappears above the indicator
on the display.
2. Make sure that the electrical power is
available and the water tap is open.
3. Pour 2 litres of water into the
detergent compartment marked by
.
This action activates the drain system.
4. Set and start a program for cotton
at the highest temperature without
any detergent and laundry in the
drum.
appears/