Table of Contents
Advertisement
14
www.aeg.com
When the display shows the indicators
and
heat the water.
6.4 Spin
When you set a program, the
appliance automatically sets the
maximum spin speed allowed.
Touch repeatedly this button to:
• Decrease the spin speed.
The display shows only
the spin speeds available
for the set program.
• Activate the Rinse Hold option.
The final spin is not performed. The
water of the last rinse is not drained
out to prevent the fabrics from
creasing. The washing program
ends with water in the drum.
The display shows the indicator
The door stays locked and the drum
turns regularly to reduce creasing.
You must drain the water to unlock
the door.
If you touch the Start/Pause button,
the appliance performs the spinning
phase and drains the water.
The appliance empties
the water out
automatically after 18
hours approximately.
• Activate the Extra Silent option. The
intermediate and the final spinning
phases are suppressed and the
program ends with water in the
drum. This helps to reduce creasing.
The display shows the indicator
The door stays locked. The drum turns
regularly to reduce creasing. You must
drain the water to unlock the door.
As the program is very quiet, it is
suitable for use at night time when
cheaper electricity tariffs are available.
In some programs the rinses are
performed with more water.
If you touch the Start/Pause button,
the appliance performs the only
draining phase.
, the appliance does not
The appliance empties
the water out
automatically after 18
hours approximately.
• Activate the drain-only option
(Skipping the wash, rinse and spin
phases): Drain Only.
The appliance performs the only
draining phase of the selected
washing program.
The display shows the indicator
(cold), and the indicator
spin) and the indicator
• Activate the spin-only option
(Skipping the wash and rinse
phases): Spin Only.
Before setting this
option, select a suitable
washing program for the
garments. The appliance
.
will performs the most
fitting spin cycle for your
garments care (e.g. For
synthetics items, first
select the Synthetics
washing program and
then the Spin Only
option).
The appliance performs only the
spinning phase of the selected
washing program.
The display shows the indicator
(cold), the phase indicator
spin speed.
6.5 Stains/Prewash
.
Press this button repeatedly to activate
one of the two options or both.
The relevant indicator goes on in the
display.
• Stain
Select this option to pre-treat heavily
soiled or stained laundry using stain
remover.
Pour the stain remover into
compartment
pre-mixed and heated with detergent
in order to improve its effectiveness.
(no
.
and the
. The stain remover is
Advertisement
Table of Contents
