Installation Of Your Cooker; Electrical Connection - Vivax FC-31502 WH User Manual

ENG
INSTALLATION OF YOUR

ELECTRICAL CONNECTION

· The adjustment conditions for this appliance are stated
on the rating label.
· Your appliance requires 16 or 32 Ampere supply
according to total power of your cooker. Please find all
required values from rating label of your cooker. If
necessary, installation by a qualified electrician is
recommended.
· Electrical connection of the cooker should only be made
to connections/sockets with an earth system installed in
compliance with local regulations. If there are no
connections/sockets with an earth system in place
where the cooker will be installed, immediately contact a
qualified electrician to install. The manufacturer is not
responsible for damages that will arise because of the
appliance not be connected to an earth system.
· Your cooker is for use with 220-240V AC or 230VAC for
mono phase and 230V/400V 3N for 3 phase 50-60 Hz
electric supply. If your supply is different from the
specified value, contact your authorized service agent.
· When placing your cooker to its location, ensure that it is
at the counter level. Bring it to the counter level by
adjusting the feet if necessary.
· Some models are supplied without a plug-an-lead set. In
this case please use a flexible cable to suitable for
connection to mono phase: H05 VV-F 3 G 2,5 mm2, H05
VV-F 3 G 4 mm2 or for 3 phase: H05 VV-F 5 G 1.5 mm2
COOKER.
10
VIVAX