1. Manuals
  2. Brands
  3. Incra Manuals
  4. Saw
  5. TS III
  6. Owner's manual

Incra TS III Owner's Manual

Incremental micro precision table saw fence
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
CONTENTS
Safety . . . . . . . . . . . . . . . . . . . 2
Rail Assembly . . . . . . . . . . . . . . 4
Base Mount Assembly . . . . . . . . . 6
Fence Assembly . . . . . . . . . . . . . 8
. . . . . . . . . . . . 9
The only table saw
fence with Automatic
Positioning Control
OWNER'S MANUAL
Please read this owner's manual before use and
keep it at hand for reference.
 The    system consists of three
packages. One of the packages contains the rails
and another, the base mount unit. These two
assemblies are covered fully by this
pages 2, 3, 6, 7, 18 and 19 of
the Ultra owner's manual.
In just about an hour or so, you are going to be
operating one of the most exciting new tools in
today's woodshops. Your table saw will undergo
a transformation, and what was once an average
saw will emerge a precision woodworking
machine, one you'll be proud of for years to
come. So take a few minutes to read over the
safety information and mounting instructions, then
grab a phillips screwdriver and a set of wrenches
and let's get started.
. . . . . . . . . . . . 11
Maintenance . . . . . . . . . . . . . . 12
Warranty . . . . . . . . . . . . . . . . . 12
owner's manual. The third
package contains the INCRA
Jig Ultra 32. Read all of this
TS III owner's manual and
. . . . . 12
TM

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TS III and is the answer not in the manual?

Questions and answers

Related Manuals for Incra TS III

Summary of Contents for Incra TS III

  • Page 1: Table Of Contents

    The third package contains the INCRA Jig Ultra 32. Read all of this TS III owner’s manual and pages 2, 3, 6, 7, 18 and 19 of the Ultra owner’s manual. In just about an hour or so, you are going to be operating one of the most exciting new tools in today’s woodshops.

  • Page 2: Safety

    Use appropriate safety devices. Keep hands clear ■ Never let any part of the INCRA TS III interfere with of the saw blade! Always use a push stick, rubber ■ another tool’s safety guards or other safety soled push block, or other safety devices to keep equipment.
  • Page 3 #10 – 32 x ⁄ " phillips pan head screw 4 each 4 each ⁄ – 16 6 each ⁄ " 6 each dual pilot rectangular nut #10 – 32 thick nylon washer flat washer hex nut INCRA TS III Owner’s Manual...

  • Page 4: Rail Assembly

    Note: The blade guard must be reinstalled after you have (See Details 1A and 1B) finished mounting the INCRA TS III to your table saw. Attach mounting brackets Attach (4) mounting brackets to the cast iron surface of your table saw using the supplied hardware. See  .
  • Page 5 The rail positions described above will provide support If you wish to customize the setup to suit your needs, for the base of the TS III for work on either the left or just slide the rails left or right as necessary. Keep in right side of the blade.

  • Page 6: Base Mount Assembly

    28" a custom cut support panel is assembly is designed for use with table saws having a front available. For details, e-mail us at questions@incra.com or to back measurement of up to 28". If your table saw call us at the number listed at the bottom of page 12.
  • Page 7 ⁄ " hex tool Third: Slide stop Second: Tighten (4) positioners up to both set screws through base clamps and holes in base clamps tighten hex bolts INCRA TS III Owner’s Manual...

  • Page 8: Fence Assembly

    If an adjustment must be made, turn off the saw and table saw, always disengage the rail hooks from walk to the rear to make the adjustment. the T-slot lip before lifting the TS III off the rails. INCRA Woodworking Tools & Precision Rules...

  • Page 9: Final Calibration

     . Lower the scale back onto the magnetic track. If you want, you can also slide the two-piece lexan scale to agree with the stainless steel scale. Make sure the overlapping ends of the scales are aligned at 16". INCRA TS III Owner’s Manual...
  • Page 10 FIG. 22 Second: Tighten Place Ultra on the rails to Moving your TS III to the left side of the blade can be quite knobs on rear rail only the left of the saw blade useful, especially on table saws which have a blade tilt to the right.

  • Page 11: Blade Guard Adjustments

    If you wish to add a ⁄ " thick table board between the right FIG. 28 hand extension wing of your table saw and the TS III base Table board support ⁄ " dia. hole mount assembly, begin by making two of the wooden supports like the one shown in ...

  • Page 12: Auxiliary Fence Mounting

    LIFETIME WARRANTY ON POSITIONING RACKS If an INCRA positioning rack in this tool becomes damaged for ANY reason, Taylor Design Group will replace it free of charge for as long as you own your tool. Return the damaged rack, transportation prepaid, and allow 2 weeks for delivery.

Table of Contents