Related Manuals for KYLAND KIEN1005
Summary of Contents for KYLAND KIEN1005
- Page 1 KIEN1005 Industrial Ethernet Switch User’s Manual KYLAND Telecom Technology Co., Ltd. 9/2006...
- Page 3 KIEN1005 Industrial Ethernet Switch User’s Manual Copyright © 2005 KYLAND Telecom Technology CO., LTD. All rights reserved. No part of this documentation may be excerpted, reproduced, translated, annotated or duplicated, in any form or by any means without the prior written permission of Kyland Corporation.
- Page 4 ──────────────────────── 2 ────────────────────────...
- Page 5 EMC protection function of Ethernet RJ45 port enable KIEN1005 to run in a harsh industrial environment and ensure a high reliability to the system。 The KIEN1005 Industrial Ethernet Switch Uses Manual mainly introduces the technical principle, performance index, installation and testing of the KIEN1005 industrial Ethernet switch, and provides the reference to users to start, expand and maintain the system.
-
Page 6: Safety Notices
Safety Notices This product can provide excellent and reliable performance within its design scope. However, it needs to avoid the damage or destroy by human reasons。 Read this Manual thoroughly and keep it well for future reference。 Do not place the equipment next to the source of water and the damp place。 ... - Page 7 Industrializing the Ethernet Simplifying Industrial Communication Description of Warning Mark: This manual uses two kinds of obvious warning marks to prompt users that more attention should be paid during operation。The meanings of these marks as follows: Warning: The comment after this mark should be paid more attention, the incorrect operation will cause the switch to be damaged seriously or it will cause body injury for the operator。...
-
Page 8: Table Of Contents
Contents Chapter One System Overview ....................7 1.1 Overview............................7 1.2 Features............................7 Chapter Two Performance Specification................... 9 2.1 System Specification........................9 2.2 Service Port Specification ......................11 2.3 Service Functions.........................11 Chapter Three Hardware Structure..................13 3.1 System Structure..........................13 3.2 Switch Structure..........................14 3.2.1Casing ............................14 3.2.2 Front Panel.........................15 Chapter Four Field-testing Methods .................. -
Page 9: Chapter One System Overview
KIEN1005-5T offers five adaptive TP ports of 10/100BASE-T/TX, which can be configured to 10BASE-T or 100BASE-TX and half-duplex or full-duplex mode。 KIEN1005-1S （M） -4T provides one full-duplex fiber port of 100Mbit/s and four TP ports of 10/100BASE-T/TX, which can be configured to 10BASE-T or 100BASE-TX and half-duplex or full-duplex mode. - Page 10 Industrial power supply Industrial DC24V（DC18V～36V）input。 Protection against over-current and over-voltage。 Protection against reverse polarity connection. Electromagnetic compatibility protection, industrial level four. Industrial casing design Highly-effective fan less heat dissipation, with operation temperature range of -35℃~+75℃. Closed aluminum casing, IP40 protection class for harsh industrial application.
-
Page 11: Chapter Two Performance Specification
Industrializing the Ethernet Simplifying Industrial Communication Chapter Two Performance Specification 2.1 System Specification The system specification of the KIEN1005 Industrial Ethernet Switch is shown in Table 2-1。 Table 2-1 System Specifications KIEN1005-5T KIEN1005-1S（M）-4T Specifications 10/100Base-TX 5 x RJ45 4 RJ45 100Base-FX 1 S（M）... - Page 12 Transmission Distance: <100m Optical power: >-13dbm(SM) >-20dbm(MM) Sensitivity: <-28dbm(SM) <-35dbm(MM) Wavelength ： 1310nm(SM) Fiber port 1550nm(SM) 1310 nm (MM) Transmission distance: 20～80Km(SM) <2Km(MM) Connector: SC/FC Transmission rate: 125Mbps Power input: DC24V（DC 18V～ Power input: DC24V（DC 18V～36V） 36V） Power supply Power consumption: <6W Power consumption: <6W Over-current protection: built-in Over-current protection: built-in...
-
Page 13: Service Port Specification
The LEDs indicate the port status correctly including transmission rate, link status and system status. 2． 802.1p Prioritization KIEN1005 conforms to 802.1p, which is used the most widely in LAN environment. The end-users of KIEN1005 can make use of this function to ──────────────────────── 11 ────────────────────────... - Page 14 Only the data package without Prioritization in the Packet in the ports can be affected by this function. THE 5th port of KIEN1005 supports 2 levels (high, low) prioritization. 3． Layer-2 Switching Switches work in two ways: Cut-Through and Store-and-Forward.
-
Page 15: Chapter Three Hardware Structure
Industrializing the Ethernet Simplifying Industrial Communication Chapter Three Hardware Structu re 3.1 System Structure Figure: 3-1 System structure The system hardware mainly consists of following parts: 1． The switching network controller adopts the high performance ASIC chip technology to provide the layer2 line rate forward for the data packet. 2．... -
Page 16: Switch Structure
3.2 Switch Structure 3.2.1Casing Figure: 3-2 KIEN1005-5T ──────────────────────── 14────────────────────────... -
Page 17: Front Panel
Industrializing the Ethernet Simplifying Industrial Communication Figure: 3-3 KIEN1005-1S（M）-5T 3.2.2 Front Panel The front panel of KIEN1005-5T has integrated five Ethernet RJ45 ports of 10Base-T/100Base-TX, one power terminal and one indicating light for power supply. Its structure is shown as Figure: 10/100M... - Page 18 The front panel of KIEN1005-1S （M） -4T contains four Ethernet RJ45 ports of 10Base-T/100Base-TX, one pair of fiber ports, one power terminal, one indicating light for power supply, and one indicating light for fiber port running status. It is structured as figure:...
- Page 19 Power Input Terminal The KIEN1005 uses the DC24V power supply. It uses the 3.81 ㎜ gap 3-wire phoenix terminal to connect to the power supply. The diameter of the power supply is less than 1.5 ㎜.
- Page 20 Figure: 3-6 Connection Diagram of DC Power Supply Terminal LED Indicator The LED indication light of the KIEN1005 front panel can display the status of the system operation and the port, which make it easy to find problem and troubleshooting. Table 3-1 describes the meanings of the front panel LED indication light.
- Page 21 No valid connection in port Property Setting Switch There is two bit of property setting switch for the KIEN1005, which are defined as T and F respectively. They are used to configure the rate of fiber port, rate of 5th Ethernet port, and broadcasting storm control ability.
-
Page 22: Chapter Four Field-Testing Methods
POW light will be always on. 4.2 Ethernet Port Testing As showed in the Figure 4-1, the KIEN1005 is powered on to connect any two Ethernet ports with two testing computers with direct link network wires. Send PING command each other. If the hardware of the tested Ethernet ports runs normally, any one computer is able to ping the other correctly without package loss. -
Page 23: Fiber Port Testing
Figure: 4-1 Testing Ethernet ports 4.3 Fiber Port Testing Use two KIEN1005 switches to build an optical fiber chain network as is shown in the Figure.4-2. Connect any one fiber port of a switch with a testing computer by straight-through cable. Send the PING command each other. - Page 24 TX RX TX RX KI EN 1005- 1S KI EN 1005- 1S M - 4T M - 4T St rai ght St r ai ght cabl e cabl e Figure 4-2 Fiber port testing PING Command： The IP address of the testing computer 1 is 192.168.100.10 and the 2 is 192.168.100.11.On the testing computer 1, run “cmd”...
-
Page 25: Appendix A: Twisted-Pair Cable And Pin Assignment Rules
Industrializing the Ethernet Simplifying Industrial Communication Appendix A: Twisted-pair Cable and Pin Assignment Rules For the 10Base-T/100Base-TX connection, the twisted-pair cable should be in two pairs. Each pair is differentiated by different colors. For instance, the one is green and the other is the green and white interleaved. There should be the RJ-45 connector at both ends of cable. - Page 26 Pin distribution of 10Base-T/100Base-TX RJ-45 connection adopts the Unshielded Twisted Paired (UTP) or the Shielded Twisted Pair (STP): the 10Mbps connection adopts the 100ohm of Cat3, Cat4 and Cat5, while the 100Mbps connection adopts the 100ohm of Cat5. Furthermore, keep in mind that the connection length of any twisted-pair should no be more than 100m.
- Page 27 Industrializing the Ethernet Simplifying Industrial Communication Figure.A-2 Order of Straight-through Cable Definition for Cross-over Cable from RJ45 (8-pin) to RJ45 (8-pin) Figure.A-3 Order of Cross-over Cable ──────────────────────── 25────────────────────────...
-
Page 29: Appendix B: Cable Type And Specifications
Industrializing the Ethernet Simplifying Industrial Communication Appendix B: Cable Type and Spe cifications The type and specification of cable is shown as Figure.B-1. Table B-1 Type and Specification of Cable Cable Type Maximum Length Connector Cat3, Cat4 Cat5, 10Base-T 100m (328 foot） RJ-45 100ohm UTP 100Base-TX... -
Page 30: Appendix C Glossary
Appendix C Glossary Terminology Explanation Twisted-pair standard of Cat3, Cat4 and Cat5 in IEEE 10Base-T specification for 10Mbps Ethernet Twisted-pair standard of Cat5 or above in IEEE 100Base-TX specification for 100Mbps Fast Ethernet Fast Ethernet which uses one pair of multi-mode or 100Base-FX single mode optical fiber to transmit. - Page 31 Industrializing the Ethernet Simplifying Industrial Communication Restless forward broadcast frame or multicast frame on Broadcast storm bridge caused by the bridge ring. Use switches to set up the point to point connection Full Duplex among nodes in the LAN and allow them to receive and send data packet at the same time.
- Page 32 Publisher: Beijing KYLAND Telecom Technology CO., LTD Address: 5/F, Office Building, Transport Center, East of Xisanqi Bridge Haidian District, Beijing, China Website: http://www.kyland.cn Postcode: 100096 Tel: （+86 10）82900770 Fax: （+86 10）82900780 Email：sales@kyland.cn ──────────────────────── 30────────────────────────...
Need help?
Do you have a question about the KIEN1005 and is the answer not in the manual?
Questions and answers