Setup Menu Options - MSB Technology The Discrete DAC User Manual

Setup Menu Options

Brightness
(Display brightness)
(Display On/Off)
Volume
(Startup volume)
(Output Level)
(Input switching)
This can be adjusted from 1 - 10 (Default 8)
Display On (Default)
• The display is on continuously
Auto off
• The display is off but will turn on
momentarily when information changes
0 - 100 (Default 70)
• The startup volume can be adjusted from 0 -
100 or disabled
Off
• In this mode, the volume control is disabled
Note: If you choose to use the DAC with an
external preamp, we recommend turning the
volume control off. To do this, turn the knob
past 100 to "off"
Low
Output
• -6dB output level with a 75Ω output
impedance. This setting is
recommended if you decide to use an
external preamp
High (Default)
• Standard output level with a 150Ω output
impedance
Manual
Switch
• Only allows manual switching between
active and previously active inputs.
The 'Auto' mode is not available
Smart (Default)
• Allows manual and auto switching between
active and previously active
inputs
Normal
• Allows manual and auto switching between
all installed inputs