Advertisement
Quick Links
Installation instructions for kick scooters - series CROSS
Step 1.
Make sure that cartoon is not damaged
Step 4.
Remove the protecting material from frame
Step 7.
Loosen the screws on the stem
and align so that it faces forward while riding
Step 10.
Remove the screws from the front part
of the stem
Step 2.
Remove the kick scooter out of the box
Step 5.
Remove the protecting material
from handlebars
Step 8.
In this step set the direction
of the stem roughly.
You will align it precisely later with the wheel on
Step 11.
Seřízený představec řádně dotáhněte.
Dotahovací moment 4 Nm
Attach the handlebars
www.kickscooters-crussis.eu
Step 3.
Remove the tape holding front and
rear wheel
Step 6.
Put wheels aside
Step 9.
Tighten the screws on the stem with force 4 NM
Step 12.
Put back the front part of the stem
and lightly tighten, adjust the angle
of the handlebar and screw it with 4 NM
Advertisement
Related Manuals for CRUSSIS CROSS Series
Summary of Contents for CRUSSIS CROSS Series
- Page 1 Dotahovací moment 4 Nm Put back the front part of the stem Remove the screws from the front part Attach the handlebars of the stem and lightly tighten, adjust the angle of the handlebar and screw it with 4 NM www.kickscooters-crussis.eu...
- Page 2 We wish you many happy kilometers Make sure that stem is properly tightened so it will suit the angle of the brake levers. on your new with force 4 NM We recommend setting at 45 degrees kick scooter CRUSSIS! www.kickscooters-crussis.eu...
Need help?
Do you have a question about the CROSS Series and is the answer not in the manual?
Questions and answers