Volume Adjustment; Battery; Pc Application; Application Overview - Cardionics SimScope User Manual

7
Wi-Fi is initialized. Pressing the power button again will activate the
shutdown sequence. A voice prompt will ask to confirm shutdown by
pressing the power button again. At shutdown a voice prompt plays,
"System powering down."
 Volume Adjustment
The plus and minus keys found on the Tech Pack controls the volume to
the headphones worn by the SP.
 Battery
The Bionic Hybrid Simulator uses two 18650 size batteries that can be
accessed from the back of the Tech Pack enclosure. The battery door
can be detached by removing the center screw with a Phillips style
screwdriver. Fully charged batteries will power the Bionic Hybrid
Simulator Tech Pack for approximately 12 hours. When the batteries are
near completion the Tech Pack will blink red. The batteries can be
recharged using the Cardionics supplied charger.
When the Tech Pack is connected to the PC through the USB cable
power is drawn from the computer and not the batteries. The batteries
are not recharged during this setup only reserved. Other features such
as pulse and EKG are disabled while USB connected.

PC Application

The PC application is a program used to access the library and
scenarios stored inside the SimScope or Bionic Hybrid Simulator Tech
Pack. It allows the user to assign sounds to site locations, preview
sounds, adjust volume defaults, create scenarios, and store them back to
the device.
 Application Overview
The figure and table that follows describes the controls and features of
the PC application.