Wi-Fi Configuration Window (Pc Application) - Cardionics SimScope User Manual

17
Name
Source
Gateway
Address
Test
Save
 Wi-Fi Configuration Window (PC Application)
Below is a table explaining each setting under the PC Wi-Fi Connection
Parameter heading (left column) found in the Wi-Fi Configuration
Window (Figure 2, Page 13).
Name
Registration
Table
Name
Serial Number
Remove
SimScope TCP
Port
If DHCP is disabled, a gateway address should be
entered for source gateway address.
Button visible only for newer model SimScopes.
SimScope wirelessly connects to an access point
while connected to the PC over USB. Useful for
confirming settings and obtaining the IP address for
pre-registration with the PC app.
Saves the Wi-Fi settings to the SimScope.
Table 3: PC Wi-Fi Connection Parameters
Function
Table that contains the friendly name and serial
number of all wireless devices recognized by the
PC application.
Column within the registration table listing the
friendly name assigned to a SimScope or Bionic
Hybrid Simulator. A name is easier to remember
than a serial number.
Column within the registered SimScope table
listing the unique number assigned to each
SimScope. The matching serial number can also
be found on SimScope rear label.
Deletes the name, IP address, and serial number
of a wireless SimScope selected in the Registered
SimScope list.
Visible only when a Wireless SimScope is
connected via USB and Show More>> is clicked.
Used to control the SimScope over Wi-Fi. The
default port number is 14046. Value must match
Function