Getting Started; Software Installation; Registering Software - Cardionics SimScope User Manual

3
Isopropyl Alcohol). Do not immerse any part of the SimScope or
Bionic Hybrid Simulator Tech Pack.
The internal wireless module complies with Part 15 of the FCC

Rules. Operation is subject to the condition that this device does not
cause harmful interference.
No serviceable parts. Do not attempt to repair or service the

SimScope or Bionic Hybrid Simulator Tech Pack. Return to
Cardionics for all repairs. Call 281-488-5901 for service directions
before returning.
The BHS pulse assembly does contain latex covered by fabric.


Getting Started

Congratulations on the purchase of the SimScope or Bionic Hybrid
Simulator. To get up and running quickly, perform the following steps:
 Software Installation
Software supplied is designed to work with Microsoft Windows 7 and
newer operating systems. If the purchase is supplied with a computer,
then the software is already loaded. If not, follow these steps to install
the software.
1. Insert the installation disk.
2. Computers with Auto Play will automatically launch the
installation Wizard. If not, locate and double-click the setup.exe
file.
3. Follow the Wizard Install instructions.
4. A Driver Installation Wizard will automatically appear during the
install process. Follow the new Wizard's instructions.
 Registering Software
After installation is complete the software must be registered before use.
1. Locate the SimScope icon on the Desktop.
2. Double-click to launch the program.